Formwork

Wall, column and slab formwork, with panels, beams, props and accessories.

Manufacturers Amico Drevo · Fermar · LANA · Maquiobras · Sáez · Urbina · Valero

Models by type

Each model has its technical sheet: dimensions, performance and equipment, as published by the manufacturer.

Sáez Liria vertical formwork Modular wall formwork with hot-dip galvanised steel frames and 70 kN/m² capacity; accessories and weight table.
Sáez Liria vertical formwork Wall formwork system with panels, accessories and weight table.
Sáez Wall formwork aligning struts Support frame system for single-sided wall formwork: components, weights and material lists.
Sáez Wall formwork support frames Aligning struts and brace frames for wall formwork: assembly, anchorage, working distances and material lists.

Sáez Column and wall formwork Assembly manual for sheet-steel formwork for columns up to 70 × 70 cm and walls, with fixing elements.
Sáez Column and wall formwork assembly manual Assembly of panels for columns up to 70 × 70 cm, with integrated Diwidag tie bar and fixing elements.

Valero Disposable circular formwork Disposable circular column formwork; the large-diameter version reaches 1200 mm with no height limit.
Valero Reltec and Tubotec disposable circular formwork Disposable circular formwork in cardboard, aluminium and polyethylene, and the Reltec system supplied in rolls.
Valero Party-wall and corner column formwork Disposable moulds for columns against party walls and in corners, fitting flush to the wall, with site instructions.
Valero Polygonal column formwork Lightweight formwork for square, party-wall and corner columns, including a reusable version.
Valero Column formwork Leaflet on patented column formwork, with images of finishes.
Valero Thermoformed column formwork Thermoformed plastic moulds for concrete columns, with models, dimensions and site installation.

Sáez Horizontal slab formwork with props Slab formwork system with props, with components and assembly stages.
Sáez Slab formwork support system Reusable horizontal formwork system for floor slabs, with components and technical data.
Sáez System 2000 slab formwork Reusable slab formwork with 1000x500 mm panels: components, assembly and edge protection.
Sáez Supports for reusable waffle slab formwork Bearers, supports and guides for reusable pans: lengths, weights and sections.
Sáez System 2000 horizontal slab formwork Two-piece slab formwork with 1000x500 mm board for 0.5, 1 and 2 m spans, with guardrails.
Fermar Manta reusable slab formwork Reusable ceiling formwork system with 2 m spacing between props, features and components.
Sáez System 2000 reusable waffle slab formwork Reusable pans, beam holders and guides with weights, sections and mechanical properties of the profiles.

Amico Drevo SD1 three-layer formwork panel Three-layer spruce panel, 21 or 27 mm, moisture resistant (AW100), in several lengths and widths.
LANA Iru-L3 three-layer formwork panel Panel 21, 27 or 30 mm thick and 500 mm wide to UNE EN 13353, with optional steel edge reinforcement.
LANA Iru-L3 three-layer formwork board Three-layer softwood formwork board bonded with MUF, certified to UNE-EN 13353.
Amico Drevo SD1 three-layer formwork panel Cross-laminated three-layer fir panel with moisture-resistant bonding; sizes, thicknesses and weights.

LANA H-20 timber formwork beam Beam with spruce flanges and 27 mm three-layer board web, with strength and use data.
LANA HABE-20 timber formwork beam Fir beam with 27 mm three-layer web and glued finger joint; dimensions, tolerances and load tables.

Urbina Telescopic props Steel props with technical data and buckling failure loads from laboratory tests.
Urbina Telescopic props Steel props with 44 kg/mm² minimum strength and tested failure loads by size.

Maquiobras Perimeter edge forms Edge forms with folding supports for slab perimeter formwork, with corner and adjustment pieces.
Maquiobras Perimeter slab edge screens Edge screens to contain concrete at slab edges, with corners and compensation pieces; available sizes.