Iglu disposable formwork

22 12 8 205 0,25 h 8 - 10 - 12 - 14 14 7 205 0,25 h 16 16 7 205 0,25 h 18 18 7 205 0,25 h 20 20 7 205 0,25 h 22 25 7 205 0,40 h 27 23 5+7 205 0,30 h 25 - 30 33,5 5+5+6,5 205 0,40 h 35 - 40 - 45 49 7 205 0,50 h 50 - 55 49 10+7 205 0,50 h 60 64 5+10 205 0,60 h 65 - 70 74 5+10 205 0,60 h 75 - 80 accessoires Advantages: • Ease of positioning due to die cutting. • Easy to cut to permit the passage of ventilation pipes, sewer and system piping. • Quick to install, saving up to 80% of the time required for traditional procedures. L-Plast accessory L-Plast is used for new constructions to create the slab and foundation beams with a single concrete casting; when restructuring is used to easily create reinforcement curbs for existing foundations. Furthermore, L-Plast is ideal for creating air ducts in general, such as for cold rooms, for example (if forced ventilation is necessary) or in geothermal applications where air must be blown into the under-fl oor cavity. When restructuring, when the existing walls must be reinforced or when an underpinning must be created, L-Plast is a useful work tool that helps creating a new slab or reinforcement base with a single casting. FLOOR WITH FOUNDATION REINFORCED CONCRETE SLAB IGLU'® FORMWORK LEAN CONCRETE SLAB THERMAL INSULATION WATER REPELLENT WATERPROOF SHEATH CASTING STOP L-PLAST L-Plast is delivered in 2 m panels with a pre-folded line (die cutting). Simply fold it along the line and position on the ground the short part of the L, keeping the long part vertical, sustained by a part of Iglù® or another foundation cage. h (cm) d (cm) L (cm) th (cm) Formwork of reference www.baygar.com