Slings, wire ropes and lifting accessories

www.baygar.com STEEL WIRE ROPE SLINGS Steel wire rope slings are normally made from galvanized 6x19+1 or 6x37+1 steel wire ropes depending on diameter. The special BY-PASS system on our presses ensures the adequate pressure. The pressing operation is made automatically and without exceeding the indicated ferrules pressure limit. They are manufactured with different type of finishes, including rings, thimbles, hooks or application-specific terany type of load. QUALITY CONTROL Each wire rope sling made with aluminum ferrule is subjected to a strict quality control, the aluminum ferrule is marked which ensures product traceability. Steel wire rope slings working load with aluminum ferrule (DIN3093) Working loads in Kg/ Safety factor 5:1 90° 60 B 120 Steel wire rope slings – Usual configurations SAMPLE 1) SAMPLE 2 SAMPLE 3 SAMPLE 4 One end with thimble One end with hook SAMPLE 5 Double hook SAMPLE 6 SAMPLE 7 One end with thimble Slide sling One end open socket ring and thimble SAMPLE 8 Different endings more than one arm Double eye Doubleeye one Double eye end with thimble double thimble We have a test bank at our disposal within our facilities. Braided slings decrease its working load 15%. Specific wire resistance 180 kg/mm².