APH hydrostatic plate compactors

1 – Manual mode with relative display of degree of compaction. When this option is selected, information relating to the achieved degree of compaction in the soil is continuously shown graphically on the easy readable display with automatic brightness regulating feature during operation. This enables the operator to adapt the mode of operation to the achieved degree of com- paction and avoid unnecessary compaction passes and possible over-compaction. 2 – Automatic mode with relative display of degree of compaction. When this option is selected, the machine automati- cally reduces the compaction performance preventing reliably harmful loosening in the upper soil layers. This option therefore also allows less experienced opera- tors to achieve an optimal compaction result. As in the manual mode, graphic information on the degree of compaction is continuously displayed, enabling the operator to respond accordingly. 3 – Measurement mode (absolute display) One machine - two tools. The measurement mode allows compaction measure- ment at any point on site. When the proportional dis- play shows that sufficient compaction is achieved, the actual kB value can be determined by the machine via measurement. For this purpose, selection of the mea- surement menu is necessary; the machine then signals via the display whether measurement can be effected. After a short time, the soil rigidity is displayed as a numerical value in MN/m. Measurement mode on/off Manual mode Automatic mode on/off Easy control www.baygar.com