Door closers

32 TESA catalogue | Doorcloser GD2XEM1 Sliding guide rail with integrated Closing Sequence selection and Electro-Mechanical door Hold Open function for double doors with concealed closers TEX14 - TEX26. Designed for concealed installation in the frame for excellent aesthetics. Classification with EN1158:1997 + A1:2002 Classification with EN1155:1997 + A1:2002 » The first door to close will be always the Pasive, followed by the Active leaf. » The Active door is prevented from closing by the selection mechanism until the Pasive leaf is almost closed. » One EM hold open set is pre-assembled in the Pasive side guide rail which allows holding both doors open at the same time. » If holding open the Active door only is preferred then the EM Hold Open device can be easily changed to the Active side guide rail. » Adjustable Hold Open position 70º-120º » Adjustable Hold open strenght by potentiometer. » Integrated Safety switch that avoids door or product damage if the Active door is forced to close manually. Any manual closing attempt on the Active leaf is detected and the Hold Open device is released immediately, thus assuring a correct and safe closing of both doors. » Power supply 24VDC, 60 mA. Quick and easy connection, polari- ty free. » Fully reversible for right or left handed doors. » For double doors from 1350 to 2800 mm. Model Finish GD2XEM1PL Silver Concealed doorclosers 3 5 3/6 1 1 0 3 5 3/6 1 1 0 EN 1155 CERTIFIED EN 1158 CERTIFIED Fire door Factory setting with EM Hold Open at the Pasive door Changing the EM Hold Open to the Active side Door machining drawings at page 35 120º 120º 120º www.baygar.com