Door closers

L Doorcloser | TESA catalogue 25 The arquitectural choice for safe double doors with slim desing and superior performance and durability. » Sliding guide rail set for CT5000 and CT4500 with integrated Closing Sequence selection and Electro-Mechanical door Hold Open for double doors. » The first door to close will be the Pasive, as the Active door will be prevented from closing by the selection mechanism until the Pasive leaf is fully closed. » Classification with EN1158:1997 + A1:2002 » Classification with EN1155:1997 + A1:2002 » One EM hold open set is pre-assembled in the Pasive side guide rail which allows keeping both doors open at the same time. » If keeping open the Active door only is preferred then the EM Hold Open set can be easily changed to the Active side guide rail. » Adjustable Hold Open position 70º-130º » Adjustable Hold open strenght by potentiometer. » Integrated Safety switch that avoids door or product damage if the Active door is forced to close manually. Any manual closing attempt on the Active leaf is detected and the Hold Open device is released immediately, thus assuring a correct and safe closing of both doors. » Power supply 24VDC, 60 mA. Quick and easy connection, polari- ty free. » Fully reversible for right or left handed doors and PULL or PUSH side monting. » The accessory ACB25 must be used for mounting at the PUSH side. (Page 25) » For double doors from 1250 to 2800 mm. at the PULL side. » For double doors from 1400 to 2800 mm. at the PUSH side. GD25EM1 3 8 3/6 1 1 3 3 8 3/6 1 1 3 Sliding guide rails for CT5000 - CT4500 EN 1155 CERTIFIED EN 1158 CERTIFIED Fire door Factory setting with EM Hold Open at the Pasive door Changing the EM Hold Open to the Active side Model Finish GD25EM1BL White GD25EM1NE Black GD25EM1PL Silver GD25EM1IM Stainless steel www.baygar.com