Mortar machines, screed conveyors and pumps

19                     Pump D6 Power D6 Power Theor. delivery rate* 25 l/min 25 l/min Delivery pressure 40 bar 25 bar Delivery distance** Up to 40 m horizontal, 15 m vertical Up to 40 horizontal, 15 m vertical Air compressor 0.55 kW / 200 l/min – Pump drive 400 V / 50 Hz / 5.5 kW at 392 rpm 220 V / 60 Hz / 5.5 kW at 392 rpm Container drive 1.1 kW at 23 rpm 1.1 kW at 23 rpm Container content 115 l 115 l Water pump 0.78 kW at 3.4 m3/h 0.78 kW at 3.4 m3/h Weight 240 kg 245 kg Length x width x height 1,324 x 728 x 1,443 mm 1,324 x 728 x 1,443 mm Filling height 984 mm 984 mm Maximum particle size 4 mm 4 mm Pressure connections M35/V25-40 M35/V25-40 Part no. 111 417.168 111 417.155 Technical data MP 25 MIXIT – 3 x 400 V 50 HZ MP 25 MIXIT – 3 x 220 V 60 HZ Equipment MP 25 MIXIT – 400 V MP 25 MIXIT – 220 V Mortar and plaster Standard colour paintwork Water pump Compressor Suction hose for water pump Cable remote control + extension Uni remixer Insulating plaster attachment Air injection hood Spacer plates Key: – Not available The MP 25 MIXIT can be dismantled into manageable and, more importantly, portable assemblies in no time at all. The large hopper and the low fill level make it distinctively more convenient and make your work easier. The material container and mixing tube are separated from each other. You open the gate valve and the material enters the mixing tube. Option Standard * The delivery rate depends on the pump model. The delivery rate can vary in accordance with the pump used. **The data is based on experience and is dependent on the materials used. www.baygar.com