Grella para céspede transitable Salvaprato Erby

3 50 cm 50 cm 3,9 cm 50 cm 50 cm 1 2 3 50 x 50 x 3,9 h 4 1,200 > 210 100 x 120 x 220 h 60 240 300 Installation Technical details Specifi cations 1. Creation of a permeable foundation layer for the plastic pavement, type Salvaprato ERBY, through the supply and positioning of small sized crushed stone, variable grain of 3/10 mm, spread out and rolled for a fi nished thickness of 5/7 cm; 2. Supply and installation of the plastic pavement, type Salvaprato ERBY by Daliform Group Srl, with the following features: 100% recycled UV stabilized material; Load capacity not less than 210 T/sqm (break monotone test load); Draining grass surface of not less than 90%; Male/female interlocking coupling system; Possibility of application of signaling elements in white/blue/yellow; The pavement will have technical features fi t for vehicular traffi c, as soon as it's installed. 3. Creation of the lawn surface by fi lling the cells of the pavement type Salvaprato ERBY with an optimal blend of topsoil, peat, silica sand and/or volcanic inert, enriched with slow release fertilizer. Supply and sowing of an optimal blend of seeds for turf suitable for vehicular traffi c at 35/40 grams per square meter. 4. Supply and installation of (white/blue/yellow) signaling elements for the demarcation of parking areas and/or routes in accordance with the provisions of the D.LL. The pavement must be produced by a Certifi ed Company with an Integrated Management System UNI EN ISO 9001 (Quality), UNI EN ISO 14001 (Environment); BSI OHSAS 18001 (Safety) and SA 8000 (Social Responsibility). ERBY SALVAPRATO About 3,9 cm. About 3,5 cm of soil About 3 cm. sand (optional) Permeable layer of about 5-7 cm Supporting Foundation Useful dimensions * Pieces per m2 Weight per piece Bearing capacity Color Pallet dimensions Sqm pallet Pallet pieces Pallet weight cm pcs. Kg./pcs. t/m2 cm m2/PAL pz./PAL Kg./PAL The practicality of the hook and the lightness of the individual grids, the moldability in various forms (a simple hacksaw will suffi ce), enable a rapid and effective implementation of Salvaprato ERBY both for large and small surfaces. After preparing a substrate carrier in relation to the nature of the site and the intended use, proceed as follows: It is recommended that a fair assessment of the local conditions of the land be carried out. Our instructions, in fact, have the character of a general nature and the preparation of the substrate must be appropriate to soil type, climatic conditions, and intensity of the load. CREATION OF A PERMEABLE LAYER (crushed stone with a variable grain of 3-10 mm) of approx 5-7 cm. Possible bedding layer with siliceous sand, properly levelled, approx. 3 cm. PREPARATION OF THE PAVEMENT WITH ERBY GRIDS. When positioning them on large surfaces or in the case of curbs or other elements that surround them perimeter, a venting space of approx. 3-5 cm should be left. FILLING OF THE ERBY GRIDS with garden soil leaving at about 1 cm from the edge, subsequent watering - so that the soil is compact in a natural way - and sowing. Material: Mixture of thermoplastic resin 100% made from recycled plastic, UV-stabilized; Modularity: Male female interlocking hooking system and claw retainers; Accessories: White, yellow, blue signaling elements for viability and/or to separate car parking areas. Anchoring pickets at high depth for high steep terrain. The Daliform Group technical office is available to our customers (designers, companies, resellers, commissioning entities) for planning, coplanning, feasibility studies, comparative and cost analyses. The technical consultancy is only valid for the Daliform Group construction systems. To contact the technical offi ce: Ph. +39 0422 208350 - tecnico@daliform.com To obtain updated technical cards, support material, new photos and case studies, go to www.daliform.com green * In consideration of the recycled material, it is permitted a size variation of 2.5%, for the same reason the colour tone is subject to variation. www.baygar.com