Encofrado non recuperable Atlantis

9 1 2 Position the fi rst element to the upper left with respect to the work surface, making sure that the arrow is pointing up; (fi g. 1) Unite the elements in sequence, by horizontal row, proceeding from the left towards the right and from the top downwards (following the direction normally used for writing), as shown graphically on the crown of each unit. (fi g. 2) Dry assembly method fi g. 1 - Dry positioning of the fi rst formwork, the arrow is facing the foundation curb fi g. 2 - Dry positioning sequence of the modules by row Application example: formwork raft The purpose of the foundation structures is to minimise deferred deformation due to the irregularity of the ground and asymmetric loads to ensure building stability. It is the two latter aspects that represent the true danger to the integrity of the foundation and the overlying structure. Once the type of foundation that is best suited for distributing the loads in the ground has been identifi ed, based on the characteristics of the building and ground, the problem goes from being technical to economical, therefore the most economic solution must be identifi ed for implementing the selected solution. A solution to this problem, without changing the type of structure, is to create a box type raft (or formwork). This obtains a honeycomb structure consisting of two fl at plates connected by mutually perpendicular beams: lower and upper slabs with a thickness of 15-20 cm with connection beams with a height of 70–120 cm positioned at variable centre distances depending on static requirements. Thanks to the Iglù® or Atlantis formworks from the Daliform Group , in association with L-Plast panels or Muro formwork, it is possible to complete the raft structure in only two phases; that is casting the lower slab on which the Daliform Group products are positioned and then casting the beams and compression slab at the same time. This makes it possible to create extremely rigid foundations at a limited cost. CROSSED BEAMS MADE OF R.C. SEPARATION SHEAT LOWER SLAB MADE OF R.C. upper stirrup lower stirrup nail tierod UPPER SLAB MADE OF R.C. POLYSTYRENE PANEL The main function of the foundation structures, such as the one proposed by the Atlantis System is to distribute the loads from the pillars, plates and walls to the ground and at the same time anchor the building to the ground, guaranteeing its stability. In some cases, always using the Atlantis System, foundation piles can be eliminated, which would instead be necessary with other construction solutions. 1st Row 2nd Row 3rd Row www.baygar.com