Encofrado non recuperable Atlantis

10 Application example: deep, multi level foundations Application example: pool restructuring It is known that a poorly dimensioned pool almost always causes operating problems, fi rst of which is suitably heating the water at a reasonable cost. For this reason the bottom of the pool must sometimes be raised in order to reduce the volume of the water. A quick and economic solution to the problem, thanks to the high resistance, is to lift up the bottom using the Atlantis System. The possibility to adjust the height of the elevator tube within a centimetre also makes it possible to easily create slopes in structures that have a fi nished bottom and surface inclined with different inclinations. The system can also be used for terracing. The Atlantis System makes it possible to adjust the height of the elevator pipes within a centimetre, which can be supplied in different measurements. This will make it easy to quickly create structures at a low cost that require variable heights such as sloping ramps, slabs and multi-level slabs. Normally, slabs are created at the same height starting from the foundation bays that are on different levels (a classic example are “reversed T” beams or isolated foundations plinth), the Atlantis System makes it possible to easily create these structures without having to interrupt the regular placement of the formworks. The described system, if combined with the Muro formwork accessory, additionally reduces implementation times. air outlet Polystyrene strip www.baygar.com