Prancha vibrante hidrostática APH

Optimal compaction performance, operators safety first Safety and easy operation are the focus of attention: ■ The remote control transmitter is equipped with an emergency stop switch. ■ The engine is started and stopped with the remote control unit, the engine start can be done in idle position. ■ The vibration can be started and stopped at operator’s request. ■ The direction of movement can be rapidly altered as desired. ■ A signal received acknowledgement light on the machine notifies the operator that the remote control unit is in infrared contact with the receiver on the plate. Should the operator loose contact with the machine it will automatically stop. ■ A surrounding control system protects the operator: in case of a distance of less than 2 metres between user and machine the plate stops and cannot be restarted. ■ The cable operation is controlled by the electric system being independent from the electronic system (can be necessary under very bad weather conditions when the remote control unit has to be recharged). ■ An electronic shut off system protects the engine via solenoid in case of insufficient oil level, dirty air filter or overheating. The engine stops after repeated starting again. ■ Considerably improved cleaning intervals of the air filter thanks to an optimised air stream guide system. ■ Strong job site proven catches and hinges. ■ Easy diagnosis of the electronic system with error memory report ■ Simple, trouble-free cable installation. ■ Storage of remote control unit and cable unit under the lookable rear cover. ■ Excellent accessibility to all maintenance and service points. All inclusive Operators safety has increasingly become a deciding factor, particularly in underground working and trench construction. There are certain situations when compaction can be hazardous, despite high technical safety stan- darts such as shuttering systems. AMMANN has developed a machine considering this cri- teria: The remote controlled vibratory plate model APH 1000 TC. It achieves high compaction results, even in the deepest trenches and most impassable areas thanks to its high performance and to the compact design due to the powerful ho- rizontally installed Hatz Supra 1 D 90 V Diesel engine. The operator controls the machine from a safe position, by either: ■ Infrared remote control transmitter, which does not require recharging, due to its solar panel ensuring a constant readiness for use - max. distance between trans- mitter and machine is 18 metres. ■ Cable control - max. possible distance transmitter and machine is 8 metres. The APH 1000 TC operates on the proven principle of fully hydrostatic system, hydrau- lic drive of the exciter shafts, and hydraulic adjustment of centrifugal weights. This gu- arantees a quick response to the commands of the operator through the remote control transmitter - in case of emergency the ma- chine can be stopped immediately. There are no wear and tear parts such as centrifugal clutches or V-belts. Safety www.baygar.com