Dispositivos electromecánicos (inglés)

I Electromechanical devices | TESA catalogue 19 Sensitive handle This handle allows the control of any electromechanical lock to anyone who touches it, even with gloves. It opens/closes a Relay contact by simple hand contact. Models for horizontal and vertical installation. It consists of two elements (supplied sepparately): Bar and sen- sor (The SENSORINT internal sensor must be fitted in.) Features Bar: » The tube is made of Aluminium with black nylon supports. It can be cut. » Maximum length: (Tube: 300mm) (Tube + support: 405mm) Sensor: » Operating voltage: 10-30Vcc » Current consumption on stand-by: 8Ma » Operating current consumption: 50mA » Protected against polarity inversion. » Control relay with C/NC/NO contacts. (Máx. 1ª a 30Vcc/120Vca) Input devices Modular handle with micro Operation » When operating the cylinder, it closes a micro capable of unlocking the door Features » Integrated internal micro-switch. » Fastening: with bolt - through fixing. * Cylinder is not included. (It requires ½ cylinder 30x10, with long lever r=15mm. In any system.) Model MPMP2SCNE Panic exit device with micro Operation » When operating the exit panic device, it activates a micro capa- ble of unblocking the door. Features » Integrated internal micro switch. » Fastening: with bolt - through fixing. Model Description BARVERTPL Barra sensitiva vertical BARHORIPL Barra sensitiva horizontal SENSORINT Sensor interno www.baygar.com