Pasarela de protección de cubierta

www.baygar.com PATENTES LEONESAS ROOF EDGE PROTECTION UNE-EN 13374 UNE-EN 1808 * The roof protection system aims to serve as a temporary platform allowing for finally finishing off of the eaves, in this way protecting against the risk of falling from a height in buildings. The installation of the set will be performed on support models: "PL 1070"— "PL 500V700"– "PL ESQUINA". THIS IS MADE UP OF: PLATFORM: Manufactured from non-slip perforated plate welded to a frame of steel profiles allowing for the different sections of the platform to be linked up and held together by means of an anchoring ring to the suspension structure. The platform has been designed according to the dimensions and requirements set by standard UNE EN 1808, these being a width of 50 cm and a skirting of 15 cm. Other dimensions are manufactured on demand. GUARDRAILING-POST: Designed in accordance with standard UNE EN 133747. This is attached individually to each retractable beam and allows the fall prevention railings to be housed. Two models are manufactured: the "straight guardrailing-post" for H500 platforms with a width of 50 cm and the "curved guardrailing-post" for H600 platforms with a width of 60 cm. RAILINGS: Manufactured out of galvanised metal sections extruded at their ends, guaranteeing an extremely safe joint. PART AT THE BEGINNING/END OF THE SECTION: This protects both ends and includes a keep pin in order to leave the railings adequately fixed. ANCHORING RING: This allows the platform to be safely joined to the structure by means of a lockscrew. Collective roof protection system Système de protection collective de couvertures 17