Padilla
Puertas cortafuegos batientes Classic

Desliza para pasar de página
Para ver la página tal como está en el catálogo, ábrela en el PDF. Abrir el PDF en la página 6
Texto de la página 6
-Three sides MC3 frame is manufactured from 1.2mm high strength steel and is completed with cold smoke seal. -Frame provided with 6 Dead-end clamps of 1.5 thickness with a maximum of 2400mm height. Over this height the frame is provided with 13 dead-end clamps. -The doors of a nominal height over 2400mm are provided with and additional hinge per leaf. -Leaf manufactured in galvanized steel sheet skin pass type, Ral COLOR 7035, 53 mm of thickness. -Rock wool insulation. -Intumescent seal in EI2 60:20 x 2mm frame. -CEN approved hinge. -CEN approved lock. - DIN standard fire resistant door handles provided in steel core of polyamide. -1 anti-crow bar device -Separators to facilitate an easy installation. -Secondary leaf provided with CR4 and bars with superior and lower closing. -Metallic identification sheet with standardization EI2 -Full instructions for fitting and maintenance of the unit are provided. - Door leaf weight 25 kg/m2. LINEA CLASSIC EI2 60 Double Leaf 18 ( Ed_ 07/06 ) HORIZONTAL SECTION OF A LEAF VERTICAL SECTION Finished Floor STANDARD FRAME FIXATION WITH CLAMPS 11 Clamps of 1,5 mm OPTIONAL Fixed with 15 screws (6 for fitting and 3 in the lintel) SCREWS NOT INCLUDED FIXED WITH SCREWS FRAMES Type "B" Type "C" Type "M" * For technical description of these finishes see page 47. FINISHES CLASSIC, frame and leaf is provided in RAL 7035. GAMMACOLOR, frame and leaf are provided in RAL goffered epoxy- polyester range INNOVA, there are optional frame colors according to RAL chart and leaf in digital printing system * For technical description of these finishes see page 47. ACCESSORIES - MC6 Embracing frame -Panic bar -locks -Door-closers -Vision panel - * For technical description of these accessories see page 90. MC3 (Standard) DESCRIPTION L2= Secondary nominal width of the leaf L1= Primary nominal width of the leaf Lt= Width of external frame Lp= Clear opening Lfm= Overall aperture H= Nominal height of the leaf Ht= Heigt of external frame Hp= Clear Opening Hfm= Overall aperture STANDARD DOORS www.baygar.com