Puertas cortafuegos batientes Classic

-Three sides MC3 frame manufactured with 1.2mm high resistance steel and completed with cold smoke seal. -Frame provided with 6 dead-end clamps of 1.5 thickness with a maximum of 2400mm height. Over this height, the frame is provided with 8 dead-end clamps. -The doors of a nominal height over 2400mm are provided with and additional hinge. -Leaf manufactured in galvanized steel sheet skin pass type, Ral COLOR 7035, 53 mm thickness. -Rock wool insulation. -Intumescent seal in EI2 60:20 x 2mm frame. -CEN approved EI hinge. -CEN approved lock and cylinder patent key. - DIN standard Fire resistant door handles provided in steel core of Polyamide. -1 anti-crow bar device -Separators to facilitate an easy installation. -Metallic identification sheet with standardization EI2 -Full instructions for fitting and maintenance of the unit are provided. - Door leaf weight 25 kg/m2. LINEA CLASSIC EI2 60 Single leaf ( Ed_ 07/06 ) 17 VERTICAL SECTION Finished Floor HORIZONTAL SECTION OF A LEAF STANDARD FRAME FIXATION WITH CLAMPS 6 Clamps of 1,5 mm OPTIONAL Fixed with 12 screws (6 for fitting) SCREWS NOT INCLUDED FIXED WITH SCREWS FRAMES Type "B" * For technical description of these finishes see page 47. FINISHES CLASSIC, frame and leaf is provided in RAL 7035. GAMMACOLOR, frame and leaf are provided in RAL goffered epoxy- polyester range INNOVA, there are optional frame colors according to RAL chart and leaf in digital printing system * For technical description of these finishes see page 47. ACCESSORIES - MC6 Embracing frame -Panic bar -locks -Door-closers -Vision panel * For technical description of these accessories see page 90. MC3 (Standard) DESCRIPTION H= Nominal height of the leaf Ht= Heigt of external frame Hp= Clear Opening Hfm= Overall aperture Lt= Width of external frame L= Nominal width of the leaf Lp= Clear opening Lfm= Overall aperture STANDARD DOORS www.baygar.com