Padilla
Puertas cortafuegos batientes Classic

Desliza para pasar de página
Para ver la página tal como está en el catálogo, ábrela en el PDF. Abrir el PDF en la página 4
Texto de la página 4
LINEA CLASSIC Multiuse double leaf ( Ed_ 07/06 ) -MC3 frame is manufactured with 1.2mm high strength steel and completed with cold smoke seal. -Frame provided with 11 dead-end clamps of 1.5 thickness with a maximum of 2400mm height. Over this height the frame is provided with 13 dead-end clamps. -The doors of a nominal height over 2400mm are provided with and additional hinge per leaf. -Leaf of 53mm thick; manufactured in galvanized steel of 0.5 mm skin pass type. -Expansible Polystyrene, 51mm thick. -CEN approved lock and cylinder patent key. -Second leaf manufactured with superior and lower locks with manual activation. -Instructions for fitting and maintenance -Leaf weight, 18kg/m2 16 HORIZONTAL SECTION OF A LEAF VERTICAL SECTION Finished Floor STANDARD FRAME FIXATION WITH CLAMPS 11 Clamps of 1,5 mm OPTIONAL Fixed with 15 screws (6 for fitting and 3 in the lintel) SCREWS NOT INCLUDED FIXED WITH SCREWS FRAMES Type "B" Type "C" Type "M" * For technical description of these finishes see page 47. FINISHES CLASSIC, frame and leaf is provided in RAL 7035. GAMMACOLOR, frame and leaf are provided in RAL goffered epoxy- polyester range INNOVA, there are optional frame colors according to RAL chart and leaf in digital printing system * For technical description of these finishes see page 47. ACCESSORIES - MC6 Embracing frame -Panic bar -locks -Door-closers -Vision panel * For technical description of these accessories see page 90. MC3 (Standard) DESCRIPTION L2= Secondary nominal width of the leaf L1= Primary nominal width of the leaf Lt= Width of external frame Lp= Clear opening Lfm= Overall aperture H= Nominal height of the leaf Ht= Heigt of external frame Hp= Clear Opening Hfm= Overall aperture STANDARD DOORS www.baygar.com