Padilla
Puertas cortafuegos batientes Classic

Desliza para pasar de página
Para ver la página tal como está en el catálogo, ábrela en el PDF. Abrir el PDF en la página 3
Texto de la página 3
LINEA CLASSIC Multiuse single leaf ( Ed_ 07/06 ) -MC3 frame is manufactured with a1.2mm high resistant steel and completed cold smoke seal. Frame provided with 4 dead-end clamps of 1.5 thickness with a maximum of 2400mm height. Over this height the frame is provided with 6 dead-end clamps. -The doors of a nominal height over 2400mm are provided with an additional hinge. -Leaf of 53mm thick; manufactured in galvanized steel of 0.5 mm skin pass type. -Expansible Polystyrene, 51mm thickness. -CEN approved lock and cylinder patent key 15 FINISHES CLASSIC, frame and leaf is provided in RAL 7035. GAMMACOLOR, frame and leaf are provided in RAL goffered epoxy- polyester range INNOVA, there are optional frame colors according to RAL chart and leaf in digital printing system FRAMES MC3 (Standard) Type "B" Type "C" Type "M" HORIZONTAL SECTION OF A LEAF VERTICAL SECTION Finished Floor STANDARD FRAME FIXATION WITH CLAMPS 4 Clamps of 1,5 mm OPTIONAL Fixed with 12 screws (6 for fitting) SCREWS NOT INCLUDED FIXED WITH SCREWS * For technical description of these finishes see page 47. * For technical description of these finishes see page 47. ACCESSORIES - MC6 Embracing frame -Panic bar -locks -Door-closers -Vision panel * For technical description of these accessories see page 90. DESCRIPTION H= Nominal height of the leaf Lt= Width of external frame L= Nominal width of the leaf Lp= Clear opening Lfm= Overall aperture Ht= Heigt of external frame Hp= Clear Opening Hfm= Overall aperture STANDARD DOORS www.baygar.com