Rejilla para suelos ecuestres Easy Ride

3 50 x 50 x 4,5 h 4 1,4 > 200 100 x 120 x 220 h 53 212 320 1 2 3 50 cm 50 cm 4,5 cm 1. Creation of a permeable foundation layer for the plastic pavement, type Easy Ride , through the supply and positioning of small sized crushed stone, variable grain of 3/10 mm, spread out and rolled for a fi nished thickness of 15-20 cm; possible bedding layer with siliceous sand, properly levelled, approx. 4 cm. Laying of the geotextile prior to the development of the fl ooring. By the square meter €_______________________________________ 2. Supply and installation of the Easy Ride pavement from the Daliform Group Srl with the following characteristics: • 100% recycled material; • Load capacity no less than 200 T/mq (monotonic rupture load test ); • Male female interlocking hooking system and claw retainers; The newly created pavement will have the technical features for stabilising the surfaces covered by the animals, also large ones, preserving mobility and safeguarding general hygiene. By the square meter €_______________________________________ 3. Level fi lling of the cells with volcanic lapillus (variable grain 0-4 mm) to keep the foundation moist, thanks to its porosity, preventing problems with dust. Then, apply a 20 cm layer of silica sand for levelling purposes. By the square meter €_______________________________________ The pavement must be produced by a Certifi ed Company with an Integrated Management System UNI EN ISO 9001 (Quality), UNI EN ISO 14001 (Environment); BSI OHSAS 18001 (Safety) and SA 8000 (Social Responsibility). Technical data Installation method Specifi cations The information contained in this catalogue could be changed. Before placing an order, request a confi rmation or updated information from the DALIFORM GROUP, which reserves the right to make changes at any moment without notice. In consideration of recycled material, it is specifi ed that there are tolerance margins caused by environmental factors. To contact the technical office: Tel. +39 0422 208350 - tecnico@daliform.com To obtain updated technical cards, support material, new photos and case studies, go to www.daliform.com The technical consultancy is only valid for the Daliform Group construction systems. Working dimensions * Pieces per m2 Weight per piece Bearing capacity Colour Pallet dimensions Pallet m2 Pallet pieces Pallet weight cm pcs. Kg./pcs. t/m2 cm m2/PAL pz./PAL Kg./PAL grey CREATION OF A PERMEABLE LAYER (crushed stone with a variable grain of 3-10 mm) of approx 15-20 cm. Possible bedding layer with siliceous sand, properly levelled, approx. 4 cm. Laying of the geotextile prior to the development of the fl ooring. PREPARATION OF THE PAVEMENT WITH EASY RIDE GRIDS When positioning them on large surfaces or in the case of curbs or other elements that surround the perimeter, a venting space of approx. 3-5 cm should be left. FILLING THE EASY RIDE GRIDS Level fi lling of the cells with volcanic lapillus (variable grain 0-4 mm) which keeps the foundation moist, thanks to its porosity, preventing problems with dust. Then, apply a 20 cm layer of silica sand for levelling purposes. * In consideration of the recycled material, it is permitted a size variation of 2.5%, for the same reason the colour tone is subject to variation. www.baygar.com