Pavimento para césped transitable Pratopratico

11 Fild grid Empty grid Sense of progresse Assembly of Pratopratico® Remember that the thinly-ribbed gratings in contact with the bottom are only suitable for lawn fi nishings. Leave empty spaces of about 3/5 cm for the natural dilatation of the material in the following cases: - in the presence of string courses or other elements delimiting the perimeter that is being treated; - when laying on variable slopes; - when laying on large surfaces (about 8/10 ml); - when the laying is carried out at various intervals. Otherwise, where you intend to create a walkway and/or a grassy external area (barbeque area, a base for a gazebo, a small path, a pool border, etc...), place the single Pratopratico® gratings with the thin ribs in contact with the bottom, so as to provide the pedestrian with a base that offers the best support. PHASES: 1. Face all the gratings in the same way, with the female hook in the upper left-hand corner; 2. Place the fi rst component in the lower right-hand corner; 3. Proceed with the assembly of the various gratings in the opposite direction to that normally used for writing: from right to left and upward from below. The fi rst example in the graph regards the most common case, that of creating a grassy path. The fl ooring must be developed in such a way so as to face the vehicle transit with the lower surface: thin ribs facing upwards in direct contact with the vehicle wheels. PHASES: 1. Face all the gratings in the same way, with the female hook in the upper left-hand corner; 2. The fi rst grating is placed in the upper left-hand corner of the surface in need of fl ooring; 3. Proceed with the assembly of the various gratings according to the direction that is normally used for writing: from left to right and downward from above. SIMPLE: Due to the light weight of each single element (1.55 kg) laying is possible with the aid of machinery. If it becomes necessary to adapt and shape the module, such as for example in the presence of wells, wolf pits etc., Pratopratico® may be cut directly on site with the tools commonly used in such cases (fl exibles, hand saw, trimmer). To join the components hook the “male/female” joint present on the sides. RAPID: It is possible to develop about 35/40 sq. m/h per worker, with an already prepared sandbed. The solidity between the various gratings is guaranteed by the male-female joint with the help of the sealing chamfers. Pose advantages: www.baygar.com