Encofrado perdido Iglu

14 15 2.000 0 5 10 5,40 0,67 0,25 3 Ø5 25 x 25 4.000 0 5 10 10,00 1,20 0,46 4 Ø5 20 x 20 6.000 5 10 15 1,90 0,67 0,35 5 Ø6 20 x 20 13.000 5 10 15 4,00 1,40 0,72 6 Ø8 20 x 20 25.000 10 15 20 2,60 1,30 0,81 10 Ø8 15 x 15 H cm 8 50x50 4,5 4,5 4,5 0,012 1,240 110x110x210 525 400 100 8 205 12 50x50 3 3 3 0,004 0,770 110x110x110 310 400 100 - - - 4 50 h A B B Iglù® Plus H 4 Iglù® Plus H 8 Iglù® Plus H 12 Iglù® Plus H 16 Iglù® Plus H 20 Iglù® Plus H 27 Iglù® Plus H 35 Iglù® Plus H 40 Iglù® Plus H 45 Iglù® Plus H 50 Iglù® Plus H 55 400 4 Ø 5/25x25 0 5 10 1,65 0,19 0,08 0,78 0,31 0,18 0,94 0,34 0,19 0,94 0,35 0,20 1,11 0,39 0,21 1,50 0,45 0,24 1,11 0,40 0,22 1,23 0,42 0,23 1,51 0,47 0,25 1,52 0,47 0,25 1,81 0,53 0,27 600 4 Ø 5/25x25 0 5 10 2,29 0,25 0,10 1,08 0,40 0,22 1,28 0,45 0,24 1,26 0,45 0,25 1,49 0,49 0,26 2,00 0,58 0,29 1,46 0,50 0,27 1,61 0,53 0,28 1,96 0,59 0,30 1,97 0,59 0,30 2,31 0,66 0,33 1100 5 Ø 6/20x20 0 5 10 3,98 0,41 0,15 1,86 0,65 0,35 2,20 0,72 0,37 2,10 0,71 0,37 2,49 0,78 0,39 3,31 0,91 0,44 2,37 0,77 0,39 2,60 0,81 0,41 3,15 0,90 0,44 3,16 0,90 0,44 3,63 0,98 0,47 2100 6 Ø 6/20x20 0 5 10 7,29 0,72 0,26 3,37 1,14 0,58 3,98 1,25 0,62 3,74 1,22 0,61 4,43 1,33 0,65 5,88 1,55 0,72 4,15 1,30 0,64 4,55 1,37 0,67 5,48 1,51 0,72 5,49 1,51 0,72 6,19 1,63 0,76 12 50x50 8 8 8 0,016 1,250 110x110x225 530 400 100 12 205 8 16 20 50x50 11 11 9,5 0,034 1,300 110x110x244 420 300 75 14 205 7 50x50 13 13 10 0,035 1,450 110x110x236 465 300 75 18 205 7 27 35 50x50 21 21 16 0,040 1,650 110x110x245 525 300 75 25 205 7 50x50 29 25,5 14,5 0,056 1,850 110x110x230 585 300 75 33,5 205 16,5 40 45 50x50 34 27,5 15 0,060 2,000 110x110x234 630 300 75 38,5 205 11,5 50x50 39 27 14,5 0,065 2,100 110x110x245 660 300 75 43,5 205 6,5 50 55 50x50 43 26,5 14 0,067 2,150 110x110x238 675 300 75 49 205 7 50x50 44 25,5 13,5 0,090 2,400 110x110x245 750 300 75 49 205 7 50 50 a b h Range * Recyclable material is allowed a size tolerance of ± 1,5%. ** The volume may vary depending on the pouring condition and the tolerance of the material. Depending on the different heights, the shape of the shuttering will differ from what is shown in the drawing. cm h cm 1 x Ø cm 2 x Ø cm m3/m2 kg. a x b x h kg. Units m2 H cm L cm D cm Working dimensions* Height h tunnel clearance Max pipe diameter A Max pipe diameter B Quantity of concrete to the crown** Weight of each unit Pallet dimensions L-Plast panels Hypothesis of ULS calculation based on Iglù® Plus system h27 cm Supposing a distributed load, the table shows minimum slab thickness, reinforcement and pressure on soil depending on lean concrete thickness. Please see the relevant technical data sheets for the dimensioning of all the various heights. Hypothesis of load kg/m2 Slab cm Mesh Ø mm cmxcm Thickness o the lean concrete cm Pressure at pillar base Kg/cm2 Pressures at the bottom of the structure The table expresses, starting from the various examples of overload and of thickness (to be given to the slab), the pressures that would be applied to the feet of the structure, in relation to the (eventual) thicknesses of the lean concrete. Use Residences Offi ces Garages Workshops Loads* Kg/m2 Slab cm Mesh Ø mm cmxcm Thickness of the lean concrete cm Pressure at pillar base Kg/cm2 * Accidental overloads in the various environments, as predicted in Table 3.1.II NTC 2008 - Values of the working loads for various categories of buildings. The material is waterproof and can therefore be stored outside. www.baygar.com