Catálogo general de máquinas para la madera (inglés)

26 27 AS93 FR256N + Trimmers Trimmer for laminate shaping. Its powerful 1,100 W motor makes it specially suited for heavy work. It can be easily converted into a sur- face router with the routing head CA66F for working with the PL11 template for dovetail joints or other routing works. Trimming laminates. Making mouldings. Optional accessories 6027056 Chuck collet 8 mm 6727020 Chuck collet 6.35 mm (1/4”) 6600050 CA66F Routing head 6650088 CPN66 Hinge fitting head Clamping systems (see page 80) Templates for fitting hinges (see page 53) Fitting hinges with the CPN66 head. Guides rings To be used with CA66F routing head 7722168 Ø ext. 10 mm (for 6 mm bits) 7722120 Ø ext. 12 mm (for 8 mm bits) 7722121 Ø ext. 14 mm (for 10 mm bits) 7722122 Ø ext. 16 mm (for 12 mm bits) 7722169 Ø ext. 18 mm (for 14 mm bits) 7722118 Ø ext. 20 mm (for 16 mm bits) 7722119 Ø ext. 27 mm (for 23 mm bits) 7722114 Ø ext. 30 mm (for 26 mm bits) 7722123 Guide for PL11 width 26 mm 7722161 Guide for PL11 width 16 mm 7722162 Guide for PL11 width 34 mm 7722160 Guide for AGB template 6640125 Bit for AGB template for bottom- hung fittings Standard equipment Flush/bevel carbide bit and service keys. Routing head CA66F (optional) to transform the AS93 into a router. Specifications Input power 1,100 W Chuck collet 6 mm No-load speed 23,000/min Weight 3.7 kg Trimmer Bits see pag. 39 This set includes the FR156N edge trimmer and the CA56U trimming head which allows to trimm al the edges of the panel continuosly. The CA56U trimming head has a large support surface and an auxiliary knob. Idela for a trimming work on the panel edge. Optional accessoires 1222084 Chuck collet 6 mm 1222085 Chuck collet 6.35 mm (1/4”) 6446073 Standard dust collector attachment 3.5 m 1746245 Standard dust collector attachment 5 m 1140106 HM bit r=3 mm with bearing 1140109 HM bit r=6 mm with bearing 1140110 HM bit r=8 mm with bearing Clamping systems (see page 80) Specifications Input power 750 W No-load speed 14,000-30,000/min-1 Chuck collet 8 mm Weight 1.6 kg Edge trimming set Trimmers Standard equipment FR156N Edge trimmer (with stan- dard head), carbide bit r=2 mm with bearing (1140123), CA56U trimming head (5600060) and carrying case. Very easy trimming of either straight or shaped pieces. Easy preparation for corner tri- mming Precise guiding for corner trimming. Vacuum connection equipped with a bearing brake to prevent leaving marks on the edge. The new fine adjustment system makes it very easy to regulate trimming head height. Round head (V3) included with the set. Very practical for trimming with support on edges and essential for jobs that require this type of work. The head includes its own vacuum collector with a brake, and is also supplied with three sliding bases. (Holes d= 20, 26 and 30 mm). It allows to trim the corners di- rectly.