Catálogo general de máquinas para la madera (inglés)

24 25 FR156N 0-91,5° 1 2 FR292R Optional accessoires 1222084 Chuck collet 6 mm 1222085 Chuck collet 6.35 mm (1/4”) 6446073 Standard dust collector attachment 3.5 m 1746245 Standard dust collector attachment 5 m 5600060 CA56U Trimming head 1140123 Carb. bit r=2 mm w/ bearing 1140109 Carb. bit r=6 mm w/bearing 1140110 Carb. bit r=8 mm w/bearing Clamping systems (see page 80) Easy to use and excellent finis- hings. Perfect finishing in a few time. For trimming edges of PVC and veneer. Equipped with a carbide bit r=3 mm with bearing (1140106). Optional bits are available for several different radius. Powerful motor (750 W) and electronic speed adjustment. Also equipped with electronic control maintaining the speed constant, independently than the working load. Dust collector connection and three bases (hole Ø 20, 26 and 30 mm) for using with bits of different diameters. The CA56U trimming head enables uninterrupted trimming of the four edges of a panel. It has a large sup- port base and an auxiliary holding knob, designed to give it perfect stability. Specifications Input power 750 W No-load speed 14,000-30,000/min Chuck collet 8 mm Weight 1.6 kg Edge trimmer Trimmers It is possible to trim all sides of the panels with radius or a chamfer. High quality finishing on corners. Special brake system for the ball bearing of the bit, avoiding that it can damage the panel when starting to work. The new fine adjustment system makes it very easy to regulate the trimming head height. Trimmers Electronic tiltable trimmer The only trimmer capable of trim- ming the excess of the panel or edge surfaces flat or at any angle, without changing the bit. Its wide base provides effective guiding and easy trimming. It offers numerous additional trimming possi- bilities, thanks to the unique tilting and adjustment system. Equipped with a powerful 750 W motor with electronic speed ad- justment and constant torque control for a constant motor speed under load. External dust collector connection. Specifications Input power 750 W Max. bit diameter 25 mm Chuck collet 8 mm No-load speed 14,000-30,000/min Weight 2.2 kg Lateral fence, avoids the irregulari- ties of the edges can be copied. Copier with ball bearing. Perfect guiding on straight or curved surfaces. Guide ring for copying with tem- plate as a small router. Trimming the edge with the straight bit. Trimming with the straight bit The tiltable motor body permits the trimming of straight edges with the straight bit (included as standard equipment) as well as the excess surface. Excess panel is trimmed with the motor body in the vertical position, and edges with the motor body inclined to 91.5º, i.e. at 1.5º below the board surface, thereby avoiding damage. Easier, more accurate trimming, with the special 90º bit. The machine body can be tilted to approximately 46.5º, so that the edge of the bit is at 1.5º to the surface, preventing damage when trimming excess edges. Once the excess coating has been trimmed from the board surface (1), just position the bit at the level of the base to trim the excess edge level with the surface (2). By simply operating a single adjustment control, you can trim a further excess surface or edge. By tilting the machine to the horizontal position, you can trim 45º chamfered edges. You can also chamfer to the an gle you require (Aº) between 0º and 45º, by tilting the motor body to the required intermediate angle (45º + Aº on the machine indicator). Standard equipment Carbide 90º bit (1140087) and straight bit Ø 18 mm (1140016) for trimming and grooving. Chuck collet Ø 8 mm, copier with ball bearing, lateral fence with compass, service keys and carrying case. Tiltable motor from 0º to 91.5º. Optional accessories 6446073 Standard dust collector attachment 3.5 m 1746245 Standard dust collector attachment 5 m 1222084 Chuck collet 6 mm 1222085 Chuck collet 6,35 mm (1/4”) Guide rings (see page 52 model FR129N) Clamping systems (see page 80) Some examples of trimming Bits see pag. 39