Catálogo general de máquinas para la madera (inglés)

92 93 AG98F AG98E PEB250TRC For edgebanding preglued PVC, me- lamine and veneer. Enables banding of circular or shaped pieces. Its spe- cial design with adjustable clamps ensures high precision work with great stability. A practical edge trim- ming system included. The possibility of surface glueing or with excess on either of the two sides. Set up time: less than one minute. Optional accessories 2800000 AU93 Edge trimmer 2100000 RC21E End trimmer 5246025 Roller inclined at 4° for edge-banding on inclined door surfaces, etc. For edgebanding preglued PVC, po- lyester, melamine and wood veneer. For the same types of banding as the AG98F. When using the lap banding guide, included in the machine set, it is possible to band the internal sides of doors, grooves or jamb cut outs. Banding the internal side of a lapped door. Banding the upper side of the lap. Optional accessories 2800000 AU93 Edge trimmer 2100000 RC21E End trimmer 5246194 Roller at 4° specially designed for banding inclined surfaces on doors, etc. Clamping systems (see page 80-84) Specifications Input power 1,500 W Maximum banding width (1 mm thickness) 50 mm Temperature I: 300°C II: 525°C Air delivery 400 l/min Weight 2.7 kg Edgebanders High precission and stability during edgebanding. Enables banding of circular or shaped pieces. 4 possibilities Specifications Input power 1,500 W Maximum rabbet width 40.5 mm Minimum rabbet height 4.5 mm Maximum banding width (1 mm thickness) 50 mm Temperature I: 300°C II: 525°C Air delivery 400 l/min Weight 2.7 kg Manual edgebander Manual edgebander Clamping systems (see page 80-84) Hot melt edgebander Hot melt edgebanders Hot melt portable edgebander. For PVC, ABS, melamine, laminate or veneer tapes, previously cut to the wanted length, on straight, round or shaped panels. Very practical for small manufacturing series on straigh panels. Easy operation and fast adjustment. table with exten- dable frontal guide to work with a total stability. The height tape adjustment and panel thickness is very easy and intutive. Equipped with assisted tape feeding and electronic speed control to work at the most conve- nient speed. With electronic temperature control the machine is also equipped with a precise control for the glue dosage. Glue pot and tape sliding base cove- red by Teflon® for an easy cleaning and maintenance. It equipes a roller holder as well as an end cutting device fro the rear cut. The gluing unit can be used as a portable edgebander just taking away the three screws which fix it to the table. Easy handle and fast setting up. Easy banding of shaped and round panels. Other models: Model PEB200TRC without electronic speed nor temperature adjustment. Very practical for small manufactu- ring series on straigh panels. Input power 830 W Adjustable working temperature1 120-200°C Working temperature2 170°C Adjustable working speed1 2, 4, 5 and 6 m/min Working speed2 3.6 m/min Panel thickness 10-62 mm (1) PEB250 and PEB250TRC, (2) PEB200 and PEB200TRC Specifications PEB250, PEB200, PEB250TRC y PEB200TRC Tape thickness 0.4-3 mm Tank capacity 230 cm3 Weight PEB250 and PEB200 9 kg Weight PEB250TRC and PEB200TRC 30 kg Speed adjustment controlled by microprocessor. Standard equipment Bag of glue 250 gr. Temperature adjustment (120 to 200°C) controlled by microproces- sor for higher accuracy on measu- rement. Temperature increasing by impul- ses. Protects the heating elements increasing their working life. NEW