Catálogo general de máquinas para la madera (inglés)

80 81 SFV50 SFV150 SVN250 SVN470 SVN460 SVN450 The vacuum table SFV50 is ideal for a quick fastening of the panel. Two clamp screws are included as standard equipment to fix the table to the workbench. It is an efficient system to hold the panel and work in a comfortable way on all its edges. The vacuum table must be used with clean, smooth and non porous panels only. It is possible to hold panels in ori- zontal or vertical position. Using several vacuum tables it is possible to hold larger panels. Standard equipment Set of two clamp screws L=100 (ref. 6045710) included Vacuum table Using two vacuum tables it is pos- sible to hold larger panels. It can be fixed to the workbench by means of the two clamp screws included as standard equipment. It is possible to hold panels in horizontal or vertical position. Vacuum table similar to SFV50, but with only one suction pad. Standard equipment 1 clamp screw L=100 Clamping systems Designed for fixing pieces with smooth and non porous surfaces by means of vacuum. The pieces remain firmly fixed, without any mark on their surface. Possibility to fix big or small pieces in different positions. The fixing force allows to work comfortably in an easy way. The air supply is done through a fast connection pipe. Its compact size makes it very versatile and handy, for working within and away from the workshop. It is possible to fix pieces in vertical or horizontal position. Ideal for several works like trimming, banding... It is possible to divide the suction plate in smaller sections by means of the set of rubber joints included with the equipment, allowing to fix small pieces. Using several SVN250 it is possible to fix big panels or pieces. The SVN250 must be fixed to the workbench by screws, through the holes on the plastic base. Holding small pieces on a section of the suction plate. Fixing pieces in vertical position. Standard equipment SVN250 with rubber joint, transpa- rent pipe with fast connector 1/4” and set of 3 rubber joints. We recommend to use the optional multiple connector (ref. 5046350) to connect the SVN250 to the air supply. Pneumatic vacuum clamp Specifications Fixing force 800 gr/cm2 at 6 bar Working pressure 5.5-7 bar Air comsuption at 5.5 bar 28 l/min Suction plate dimensions 150x150 mm Unit dimensions 160x22x200 mm Weight 325 gr The air supply is done through the fast connection pipe. Clamping systems Specifications SVN450/SVN460/SVN470 Fixing force 800 gr/cm2 at 6 bar Working pressure 5.5-7 bar Air consumption at 5.5 bar 28 l/min Suction plate dimensions 150x150 mm Tilting/swivelling vacuum fastening system Tilting vacuum fastening system The SVN450 fastening tilting system consists of an SVN250 basic system fitted on a tilting support. Allows you to machine the edges and surface of the piece without changing the grip. It includes an air distributor with four free sockets, which allows the connection of SVN470 or SVN250 auxiliary units, equipped with valve and quick connector to the pneu- matic system. Also included in the equipment is a G-clamp for quick clamping of the SVN450 system to the workbench and a set of three rubber seals of different perimeters. Available with the option of a set of four screws for fitting an SVN250 on the base (0999102). The SVN460 multiple fastening system consists of an SVN250 basic system fitted on a tilting and swive- lling support. The SVN460 allows you to machine the edges and surface of the part without changing the grip. It includes an air distributor with four free sockets, which allows the connection of SVN250 or SVN470 auxiliary units, equipped with valve and quick connector to the pneu- matic system. Also included in the equipment is a G-clamp for quick clamping of the SVN460 system to the workbench and a set of three rubber seals of different perimeters. Available with the option of a set of four screws for fitting an SVN250 on the base (0999102). Allows to place the piece in the correct position. Auxiliary tilting fastening system to be connected to the SVN450 or SVN460. Allows you to machine the edges and surface of big pieces. Adjustable tilting and swivellig support. Distributor for connection of up to four auxiliary SVN470 or SVN250 units. Adjustable tilting support. Gripping large pieces with the help of an SVN470 auxiliary unit. Gripping large pieces with the help of an SVN470 auxiliary unit.